Empirical Labs | EL8-XS Distressor | Stereo Pair | British Mode & Stereo Image Link Compressor / Limiter Empirical Labs

The Empirical Labs Distressor EL8-X single-channel analog compressor adds some distinctive British flabour to an already outstanding unit! The EL8-X provides the aggressive “all buttons in” characteristics obtained from the classic LN1176, courtesy of an onboard British Mode switch. While the Distressor can function very smoothly and transparently, the addition of the British Mode allows it to take on a very “un-subtle” character, giving you the best of two compressors in one! If you want the functionality of a Distressor plus aggressive “British” vibe, choose the EL8-X!

Using the British Mode
Put the unit in the 1:1 ratio and turn on the British Mode Switch (flip it up and the LED should be lit). That enables it. To sound like the 1176 the only constraint is to keep the attack well under 4 on the Distressors – their attack can go much longer than the 1176. Now you will find that the unit has a new attitude! The attack and release will generally be more aggressive and the unit will get in and out of the way very quickly. Interestingly, the unit will be slightly less coloured when not compressing. Use this ratio to “skim” peaks. This means that most of the time it may not be doing anything, but when it does “hit” the signal, it will smoothly push back the signal and then get right out of the way again. If you are hitting the Gain Reduction all the time with the British mode on, you are going to be really “squashing” the signal. On the other hand, the Distressor will sound fairly subtle when compressing all the time in 2:1 mode, especially with a slower attack (>6).

• “All buttons in” British Mode switch with LED
• Frequency response: 2Hz to 160kHz in clean audio mode (+0, -3 dB). Response is shaped in distortion modes (Dist 2, Dist 3)
• Dynamic range: 110 dB from max. output to min. output in 1:1 mode.
• Distortion ranges between .02% and 20% depending on distortion mode and release times set on front panel.
• DC coupled output – High quality input caps.
• Input impedance: 20K ohms
• Output impedance: < 75 ohms
• Time constants: Attack range 50uS – 50mS
• Release range: .05 sec to 3.5 seconds, normal modes and up to 20 seconds in 10:1 opto mode. Time constants are dependant on ratio.
• Metal chassis
• Dimensions: 1.75″ H x 10″ D x 19″ W